High Tech Aerator
  • Item No. : High Tech Aerator
  • Product Name :
Description :
INTRODUCTION: High Tech Aerator oxygenates by blowing in and disperses air at depth in micronized bubbles. High Tech Aerator can introduce pure oxygen , keep water fresh, flowing, circulating and the greater the operating depth, the greater the dissolution of oxygen in the water. It’s easy to install and adjust to the required depth with the angle desired for numerous uses and its body keeps in resistant to corrosion. APPLICATION FOR: Wastewater treatment of large building, school, house, factory, livestock husbandry and aquatics. FUNCTIONS: 1.INCREASING OXYGEN. Zen-O2 forces air into the tank with water, stirring and aerating the water in the tank simultaneously, the great amount of micronized bubbles created promptly, prolongs stop of air and extend contact area in the water. It is very effective, with an oxygen transfer rate of approximately 16-24%, Oxygen uptake : 1.02kg.O2/Hr-Hp. 2.CIRCULATION. To keep a firm temperature in the water. To avoid stratifying (circulating speed ＞60cm/sec) To avoid settling of organics (circulating speed＞ 80cm/sec) To keep MLSS firmly (circulating speed＞ 15cm/sec), no anaerobic sludge. 3.AIR STRIPPING. To avoid sazardous air and insoluble solvent dissolving into water. 4.EASY INSTALLATION. Easy to install, lightweight, practical and easy to adjust to the required depth with the angle desired for numerous uses. Easy to maintain. ADVANTAGE: Low cost (No need of blower, diffuser equipment and pipeline’s installation) Non-clogging Free noise High oxygen transfer rate of approximately 16-24% High circulation Not limited by topography FEATURES: Quick increasing the amount of Oxygen and water circulation Lightweight, low electricity consumption, easy installation Resistant to corrosion practical and easy to adjust to the required depth with the angle desired for numerous uses.
HP
Voltage
Oxygen uptake
Aeration tank(m)
2HP

220V/3Phase

380V/3Phase

 1.46-1.55kg.O2/Kw-Hr
L
W
H
5
4
3
Installation at depth 1-2m
Material
Body/ bent pipe/ horizontal plate SUS 304
Impeller / cavity lid PP
 
Features :
Quick increasing the amount of Oxygen and water circulation
Lightweight, low electricity consumption, easy installation
Resistant to corrosion
practical and easy to adjust to the required depth with the angle desired for numerous uses.
 
Specification :
HP
Voltage
Oxygen uptake
Aeration tank(m)
2HP

220V/3Phase

380V/3Phase

 1.46-1.55kg.O2/Kw-Hr
L
W
H
5
4
3
Installation at depth 1-2m
Material
Body/ bent pipe/ horizontal plate SUS 304
Impeller / cavity lid PP
 
Loading...
Contact Us